View VW193_1644829.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

vw 198/vw 193 /vw171 series lcd monitor user guide q3031 v3 september 2007
ii copyright ? 2007 asustek computer inc. all rights reserved. no part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of asustek computer inc. (asus). product warranty or service will not be extended if: (1) the product is repaired, modifed or alt ered, unless such repair, modifcation of alteration is authorized in writing by asus; or (2) the serial number of the product is defaced or missing. asus provides this manual as is without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. in no event shall asus, its directors, officers, employees or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of use or data, interruption of business and the like), even if asus has been advised of the possibility of such damages arising from any defect or error in this manual or product. specifications and information contained in this manual are furnished for informational use only, and are subject to change at any time without notice, and should not be construed as a commitment by asus. asus assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identifcation or explanation a nd to the owners beneft, without intent to infringe. table of contents notices .......................................................................................................... iii safety . information ....................................................................................... iv care . & . cleaning . ........................................................................................... v chapter . 1: . product . introduction . 1.1 . welcome! .. ..................................................................................... 1-1 1.2 . package . contents .......................................................................... 1-1 1.3 . assembling . the . monitor . base ...................................................... 1-2 1.4 . monitor . introduction ..................................................................... 1-3 1.4.1 front of the lcd monitor ................................................ 1-3 1.4.2 rear of the lcd monitor ................................................ 1-4 chapter . 2: . setup 2.1 . adjusting . the . monitor ................................................................... 2-1 2.2 . detaching . the . arm/stand . (for . vesa . wall . mount) ....................... 2-2 chapter . 3: . general . instruction .. 3.1 . osd . (on-screen . display) . menu . ................................................. 3-1 3.1.1 how to reconfgure .......................................................... 3-1 3.1.2 osd function introduction .............................................. 3-1 3.2 . specifcations summary ............................................................... 3- 4 3.3 . troubleshooting . (faq) ................................................................. 3- 5 3.4 . supported . operating . modes ........................................................ 3- 6
iii notices federal . communications . commission . statement this device complies with part 15 of the fcc rules. operation is subject to the following two conditions: ? this device may not cause harmful interference, and ? this device must accept any interference received including interference that may cause undesired operation. this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer s instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ? reorient or relocate the receiving antenna. ? increase the separation between the equipment and receiver. ? connect the equipment to an outlet on a circuit different from that to which the receiver is connected. ? consult the dealer or an experienced radio/tv technician for help. canadian . department . of . communications . statement this digital apparatus does not exceed the class b limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the canadian department of communications. this class b digital apparatus complies with canadian ices-003. as an energy star ? partner, our company has determined that this product meets the energy star ? guidelines for energy effciency.
iv safety information ? before setting up the monitor, carefully read all the documentation that came with the package. ? to prevent fre or shock hazard, never expose the monitor to rain or moisture. ? never try to open the monitor cabinet. the dangerous high voltages inside the monitor may result in serious physical injury. ? if the power supply is broken, do not try to fx it by yourself. contact a qualifed service technician or your retailer. ? before using the product, make sure all cables are correctly connected and the power cables are not damaged. if you detect any damage, contact your dealer immediately. ? slots and openings on the back or top of the cabinet are provided for ventilation. do not block these slots. never place this product near or over a radiator or heat source unless proper ventilation is provided. ? the monitor should be operated only from the type of power source indicated on the label. if you are not sure of the type of power supply to your home, consult your dealer or local power company. ? use the appropriate power plug which complies with your local power standard. ? do not overload power strips and extention cords. overloading can result in fre or electric shock. ? avoid dust, humidity, and temperature extremes. do not place the monitor in any area where it may become wet. place the monitor on a stable surface. ? unplug the unit during a lightning storm or if it will not be used for a long period of time. this will protect the monitor from damage due to power surges. ? never push objects or spill liquid of any kind into the slots on the monitor cabinet. ? to ensure satisfactory operation, use the monitor only with ul listed computers which have appropriate confgured receptacles marked between 100-24 0v ac. ? if you encounter technical problems with the monitor, contact a qualifed service technician or your retailer.
v care & cleaning ? before you lift or reposition your monitor, it is better to disconnect the cables and power cord. follow the correct lifting techniques when positioning the monitor. when lifting or carrying the monitor, grasp the edges of the monitor. do not lift the display by the stand or the cord. ? cleaning. turn your monitor off and unplug the power cord. clean the monitor surface with a lint-free, non-abrasive cloth. stubborn stains may be removed with a cloth dampened with mild cleaner. ? avoid using a cleaner containing alcohol or acetone. use a cleaner intended for use with the lcd. never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock. the . following . symptoms . are . normal . with . the . monitor: ? the screen may ficker during the initial use due to the nature of the fuorescent light. turn off the power switch and turn it on again to make sure that the ficker disappears. ? you may find slightly uneven brightness on the screen depending on the desktop pattern you use. ? when the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. the screen will recover slowly or you can turn off the power switch for hours. ? when the screen becomes black or fashes, or cannot work anymore, contact your dealer or service center to fx it. do not repair the screen by yourse lf! conventions . used . in . this . guide warning: information to prevent injury to yourself when trying to complete a task. caution: information to prevent damage to the components when trying to complete a task. important: information that you must follow to complete a task. note: tips and additional information to aid in completing a task.
vi where to fnd more information refer to the following sources for additional information and for product and software updates. 1. . asus . websites the asus websites worldwide provide updated information on asus hardware and software products. refer to http://www.asus.com 2. . optional . documentation your product package may include optional documentation, such as warranty card, that may have been added by your dealer. these documents are not part of the standard package.
1- 1 asus lcd monitor vw19 8/VW193 /vw171series 1.1 welcome! thank you for purchasing the asus ? vw19 8/VW193/vw171 series lcd monitor! the latest widescreen lcd monitor from asus provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. with these features, you can enjoy the convenience and delightful visual experience that the vw19 8/VW193/vw171 series brings you! 1.2 package contents check your vw19 8/VW193/vw171 series lcd package for the following items: lcd monitor user manual cd quick start guide 1 x power cord 1 x vga cable 1 x dvi cable (only for some models) 1 x audio cable (only for some models) if any of the above items is damaged or missing, contact your retailer immediately. monitor base
1- chapter 1: product introduction 1.3 assembling the monitor base to assemble the monitor base: 1. connect the base with the monitor. a click indicates that the base has been connected successfully. . adjust the monitor to the angle that is most comfortable for you. we recommend that you cover the table surface with soft cloth to prevent damage to the monitor. 2 1
1- 3 asus lcd monitor vw19 8/VW193/vw171 series 1.4 monitor introduction 1.4.1 front of the lcd monitor 1. button: ? automatically adjust the image to its optimized position, clock, and phase by long pressing this button for -4 seconds (for vga mode only). ? use this hotkey to switch from five video preset modes (game mode, night view mode, scenery mode, standard mode, theater mode) with splendid? video enhancement technology. ? exit the osd menu or go back to the previous menu as the osd menu is active. . button: ? press this button to decrease the value of the function selected or move to the previous fuction. ? this is also a hotkey for volume adjustment. 3. menu button: ? press this button to enter/select the icon (function) highlighted while the osd menu is activated. 4. button: ? press this button to increase the value of the function selected or move to the next fuction. ? this is also a hotkey for brightness adjustment. 4 5 6 1 2 3
1- 4 chapter 1: product introduction 1.4.2 rear of the lcd monitor rear connectors rear connectors (from left to right) 5. power button ? press this button to turn the monitor on/off. 6. power indicator ? the color defnition of the power indicator is as the below table. status description blue on amber standby mode off off 1. ac-in port . this port connects the power connector from the bundled power cord. . audio-in port . this port connects pc audio source by the bundled audio cable. (only for some models) 3. dvi port . this 4-pin port is for pc (personal computer) dvi-d digital signal connection. (only for some models) 4. vga port . this 15-pin port is for pc vga connection. screw holes for vesa wall mount 4 3 2 1
2- asus lcd monitor vw 9 8/VW193 /vw171 series 2.1 adjusting the monitor ? for optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. ? hold the stand to prevent the monitor from falling when you change its angle. ? you can adjust the monitors angle from -5o to 20o. -5o~20o
2- 2 chapter 2: setup 2.2 detaching the arm/stand (for vesa wall mount) the detachable stand of the vw 98/v193 /vw171 series lcd monitor is specially designed for vesa wall mount. to detach the arm/stand: . remove the arm cover. 2. have the front of the monitor face down on a table. 3. use a screwdriver to remove the three screws on the stand of the monitor as the below drawing shows. 4. detach the arm from the monitor. ? we recommend that you cover the table surface with soft cloth to prevent damage to the monitor. ? hold the stand of the monitor when you remove the screws. the vesa wall mount kit ( 00 mm x 00 mm) is purchased separately. screws
3- asus lcd monitor vw 9 8/VW193/vw171 series 3.1 osd (on-screen display) menu 3.1.1 how to reconfgure . press the menu button to activate the osd menu. 2. press and to navigate through the functions. highlight and activate the desired function by pressing the menu button. if the function selected has a sub-menu, press + and - again to navigate through the sub-menu functions. highlight and activate the desired sub-menu function by pressing the menu button. 3. press and to change the settings of the selected function. 4. to exit the osd menu, press the button. repeat step 2 and step 3 to adjust any other function. 3.1.2 osd function introduction 1. spendid this function contains five sub-functions you can select for your preference. each mode has the reset selection, allowing you to maintain your setting or return to the preset mode. ? scenery mode : best choice for scenery photo display with splendid? video enhancement. ? standard mode : best choice for document editing with splendid? video enhancement. ? theater mode : best choice for movie with splendid? video enhancement. ? game mode : best choice for game playing with splendid? video enhancement. ? night view mode : best choice for dark-scene game or movie with splendid? video enhancement. ? in the standard mode, the satuation and sharpness functions are not user-configurable. ? in the other modes, the srgb function is not user-configurable.
3- 2 chapter 3: general instruction 2. image you can adjust brightness, contrast, sharpness, saturation,position (vga only), and focus (vga only) from this main function. ? brightness: the adjusting range is from 0 to 00. is a hotkey to activate this function. ? contrast: the adjusting range is from 0 to 00. ? sharpness: the adjusting range is from 0 to 00. ? saturation: the adjusting range is from 0 to 00. ? position: adjusts the horizontal postition (h-position) and the vertical position (v-position) of the image. the adjusting range is from 0 to 00. ? focus: reduces horizonal-line noise and vertical-line noise of the image by adjusting (phase) and (clock) separately. the adjusting range is from 0 to 00. ? phase adjusts the phase of the pixel clock signal. with a wrong phase adjustment, the screen shows horizontal disturbances. ? clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. if the frequency is not correct, the screen shows vertical stripes and the image is not proportional. 3. color select the image color you like from this function. ? color temp.: contains five color modes including cool, normal, warm, srgb, and user mode. ? skin tone: contains three color modes including reddish, natural, and yellowish. in the user mode, colors of r (red), g (green), and b (bluee) are user- configurable; the adjusting range is from 0- 00.
3- 3 asus lcd monitor vw 9 8/VW193/vw171 series 5. system setup allow you to adjust the system. ? volume: the adjusting range is from 0 to 00. is a hotkey to activate this function. ? osd setup: adjusts the horizontal postition (h-position) and the vertical position (v-position) of the osd. the adjusting range is from 0 to 00. in the osd timeout selection, you can adjust the osd timeout from 0 to 20. ? language: there are ten languages for your selection, including english, german, italian, french, dutch, spanish, russian, traditional chinese, simplified chinese, japanese, and korean. ? aspect controls: adjusts the aspect ratio to full or 4:3. ? information: shows the monitor information. ? reset: yes allows you to revert to the preset mode. 4. input select in this function, you can select either vga or dvi input source. (only for some models)
3- 4 chapter 3: general instruction 3.2 specifcations summary *specifcations are subject to change without notice. model vw198t/s/d VW193t/s/d vw171t/s/d panel size 19"wide 19"wide 17"wide max. resolution wsxga+ 1680x1050 wxga+ 1440x900 wxga+ 1440x900 brightness (typ.) 300 300 250 contrast ratio (typ.) 1000:1 800:1/850:1(VW193d only) 600:1 viewing angle (h/v), cr R10 160/160 160/160; 170/160(VW193d only) 160/150 display colors 16.7m/16.2m(vw198d only) 16.7m/16.2m(VW193d only) 16.2m response time 5ms (tr+tf) 5ms (tr+tf) 8ms (tr+tf) analog input yes yes yes digital input dvi(vw198t only) dvi(VW193t only) -- speaker(built-in) 1w x 2 (vw198t and vw198s only) 1w x 2 (VW193t and VW193s only) 1w x 2 (vw171s only) tilt +20 ~ -5 +20 ~ -5 +20 ~ -5 vesa wall mount 100 x 100mm 100 x 100mm 100 x 100mm physical dimension (wxhxd) 444x364x210mm 444x364x210mm 408x341x210mm box dimension (wxhxd) 513x425x155mm 513x425x155mm 469x412x150mm net weight (esti.) 4.3kg 4.3kg 3.3kg gross weight (esti.) 5.8kg 5.8kg 5.3kg voltage rating ac: 100~240v (built-in) ac: 100~240v (built-in) ac: 100~240v (built-in)
3- 5 asus lcd monitor vw 9 8/VW193/vw171 series 3.3 troubleshooting (faq) problem possible solution power led is not on ? press the button to check if the monitor is in the on mode. ? check if the power cord is properly connected to the monitor and the power outlet. the power led lights amber and there is no screen image ? check if the monitor and the computer are in the on mode. ? make sure the signal cable is properly connected the monitor and the computer. ? inspect the signal cable and make sure none of the pins are bent. ? connect the computer with another available monitor to check if the computer is properly working. screen image is too light or dark ? adjust the contrast and brightness settings via osd. screen image is not centered or sized properly ? press the button for two seconds to automatically adjust the image. ? adjust the h-position or v-position settings via osd. screen image bounces or a wave pattern is present in the image ? make sure the signal cable is properly connected to the monitor and the computer. ? move electrical devices that may cause electrical interference. screen image has color defects (white does not look white) ? inspect the signal cable and make sure that none of the pins are bent. ? perform reset via osd. ? adjust the r/g/b color settings or select the color temperature via osd. screen image is blurry or fuzzy ? press the button for two seconds to automatically adjust the image (for vga mode only). ? adjust the phase and clock settings via osd. no sound or sound is low ? ensure that the audio cable is properly connected to the monitor and the computer ? adjust the volume settings of both your monitor and computer. ? ensure that the computer sound card driver is properly installed and activated.
3- 6 chapter 3: general instruction 3. 4 vw198 supported operating modes mode resolution fre q uenc y horizontal frequency vertical frequency pixel 640 x 480 31,469khz 60hz 25,175mhz 640 x 480 37,861khz 72hz 31,50mhz 640 x 480 37,50khz 75hz 31,50mhz 800 x 600 35,156khz 56hz 36,00mhz 800 x 600 37,879khz 60hz 40,00mhz 800 x 600 48,077khz 72hz 50,00mhz 800 x 600 46,875khz 75hz 49,50mhz 1024 x 768 48,363khz 60hz 65,00mhz 1024 x 768 56,476khz 70hz 75,00mhz 1024 x 768 57,70khz 72hz 78,40mhz 1024 x 768 60,023khz 75hz 78,75mhz 1152 x 864 67,5khz 75hz 108,00mhz 1280 x 960 60khz 60hz 108,00mhz 1280 x 800 49,702khz 60hz 83.5mhz 1280 x 800 62,795khz 75hz 106.5mhz 1280 x 1024 63,981khz 60hz 108,00mhz 1280 x 1024 74,4khz 70hz 124,9mhz 1280 x 1024 77,9khz 72hz 134,6mhz 1280 x 1024 79,976khz 75hz 135,00mhz 1440 x 900 55,935khz 60hz 106,5mhz 1440 x 900 70,635khz 75hz 136,75mhz wsxga 1680 x 1050 65,29khz 60hz 146.25mhz modo resolution fre q uenc y horizontal frequency vertical frequency pixel 640 x 350 31,469khz 70hz 25,175mhz 720 x 400 31,469khz 70hz 28,322mhz modo frecuencia de resolucin frecuencia horizontal frecuencia v ertical pxel vga 640 x 480 35khz 67hz 30,24mhz svga 832 x 624 49,725khz 75hz 57,2832mhz modos mac dos wxga vga svga xga mac wxga+ sxga modos ibm notes those modes are for vw198 series only.
3- 7 chapter 3: general instruction 3. 5 VW193/vw171 supported operating modes mode resolution frequency horizontal frequency vertical frequency pixel vga 640 x 480 3 .469khz 60hz 25. 75mhz 640 x 480 37.86 khz 72hz 3 .50mhz 640 x 480 37.50khz 75hz 3 .50mhz svga 800 x 600 35. 56khz 56hz 36.00mhz 800 x 600 37.879khz 60hz 40.00mhz 800 x 600 48.077 khz 72hz 50.00mhz 800 x 600 46.875khz 75hz 49.50mhz xga 024 x 768 48.363khz 60hz 65.00mhz 024 x 768 56.476khz 70hz 75.00mhz 024 x 768 57.70khz 72hz 78.40mhz 024 x 768 60.023khz 75hz 78.75mhz mac 52 x 864 67.5khz 75hz 08.00mhz 280 x 960 60khz 60hz 08.00mhz sxga 280 x 024 63.98 khz 60hz 08.00mhz 280 x 024 74.4khz 70hz 24.9mhz 280 x 024 77.9khz 72hz 34.6mhz 280 x 024 79.976khz 75hz 35.00mhz wxga+ 440 x 900 55.935khz 60hz 06.5mhz 440 x 900 70.635khz 75hz 36.75mhz mode resolution frequency horizontal frequency vertical frequency pixel dos 640 x 350 3 .469khz 70hz 25. 75mhz 720 x 400 3 .469khz 70hz 28.322mhz mode resolution frequency horizontal frequency vertical frequency pixel vga 640 x 480 35khz 67hz 30.24mhz svga 832 x 624 49.725khz 75hz 57.2832mhz ibm modes mac modes * modes not listed in the above tables may not be supported. for optimal resolution, we recommend that you choose a mode listed in the above tables

▲Up To Search▲

Price & Availability of VW193

	To Download VW193 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .